Slide-in ramps
The ramps slide into their housing under the trailer when not in use, so they never clutter the load or go missing. They pull out in seconds to load wheeled equipment.
This N&N flatbed is an open-deck trailer in galvanized steel. With no high sides or roof, the deck loads from every side, by forklift or by driving on, and the load is easy to tie down with straps or chains.
It is used for compact machinery, tractors, cars, lumber, long materials and pallets. The hemlock floor gives good grip to tires and tracks, and the low deck makes loading from the rear easy.
This 2027 7 × 16 ft trailer, unit #8090, comes with 5,200 lb axles, a 14 ft flat deck with a 2 ft beavertail, 14 × 60 in slide-in ramps, a 2 ft beavertail and a 24 in deck height. It is built in Québec by N&N.
See all our flatbed trailersWhat this equipment does for you day to day.
The ramps slide into their housing under the trailer when not in use, so they never clutter the load or go missing. They pull out in seconds to load wheeled equipment.
Solidly mounted rings and anchors let you strap or chain the load down so it stays put during the trip.
The wood floor absorbs impacts, is easy to repair and gives good grip to tires and tracks. You can also fasten chocks to it to block a load.
This trailer’s specifications, grouped by category.
Ask us for this trailer’s payload and GVWR: we will check with you that your vehicle can tow it safely.
Note unit number 8090 and come see the trailer at 270, route 343 in Saint-Ambroise-de-Kildare. Bring your load’s measurements and your vehicle’s details: we will help you choose the right trailer.
Plan my visitN&N Flatbed trailer 7 × 16 ft, unit 8090: ask a question, plan a visit or apply for financing. We get back to you quickly.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.