Tie-down points
Solidly mounted rings and anchors let you strap or chain the load down so it stays put during the trip.
The N&N Deck Over Tilt is a 24 ft tilt trailer with the deck built over the wheels. That gives a 102 in full-width deck, and the whole deck tilts on a hydraulic cylinder, so you load without ramps.
It suits vehicles, tractors, wide machinery and pallets, with an 8,550 lb payload capacity. The winch track and winch plate let you add a winch to pull loads that do not roll, and fold-down steps make it easy to climb onto the deck.
This 2026 24 ft trailer, unit #2731, comes with a 36 in deck height, a double-acting hydraulic tilt, a 102 in full-width deck, an 8,550 lb payload capacity and a welded winch plate. It is built in Québec by N&N.
See all our tilt trailersWhat this equipment does for you day to day.
Solidly mounted rings and anchors let you strap or chain the load down so it stays put during the trip.
The wood floor absorbs impacts, is easy to repair and gives good grip to tires and tracks. You can also fasten chocks to it to block a load.
The box keeps straps, chains, chocks and small tools within reach, dry and out of the load.
This trailer’s specifications, grouped by category.
Ask us for this trailer’s payload and GVWR: we will check with you that your vehicle can tow it safely.
Note unit number 2731 and come see the trailer at 270, route 343 in Saint-Ambroise-de-Kildare. Bring your load’s measurements and your vehicle’s details: we will help you choose the right trailer.
Plan my visitN&N Deck Over Tilt 24 ft, unit 2731: ask a question, plan a visit or apply for financing. We get back to you quickly.
Rather talk to someone? 450 759-0472
Monday to Friday, 8 a.m. to 5 p.m.